Collection > Product

MaxFlo Motorsport AN8 STAT-O-SEAL 3/4" / 19.05MM ID

Our special aluminium Stat-O-Seals are much more reliable than the more common steel version. Even if the rubber portion fails to make contact all around the port, the aluminium acts as a crush washer, providing a reliable metal-on-metal seal.

Each Stat-O-Seal has a Buna-N inner seal bonded to the centre of the aluminium washer. The Buna-N rubber is resistant to water, oil, and petroleum fuels (not for use with brake fluid). Use them to seal screws, bolts, or plumbing fittings. The rubber insert is moulded to be slightly thicker than the washer, though not quite as thick as a standard rubber O-ring. Stat-O-Seals should not be used to replace O-rings on chamfered ports.

Sold individually.

Stat-O-Seal Dimensions
Nominal
Size
ID Equivalent AN Size
(Plumbing Fittings)
AN Size
(Bolts)
OD Thickness
(Aluminium)
Thickness
(Rubber)
3/16" 0.187"
4.7mm
- AN3 0.44" 0.050" 0.075"
1/4" 0.250"
6.4mm
- AN4 0.50" 0.050" 0.075"
5/16" 0.312"
7.9mm
2AN AN5 0.60" 0.050" 0.075"
3/8" 0.375"
9.5mm
3AN AN6 0.66" 0.050" 0.072"
7/16" 0.437"
11.1mm
4AN AN7 0.76" 0.050" 0.073"
1/2" 0.500"
12.7mm
- AN8 0.88" 0.050" 0.075"
9/16" 0.562"
14.3mm
6AN AN9 1.06" 0.050" 0.075"
5/8" 0.625"
15.9mm
- AN10 1.19" 0.050" 0.075"
3/4" 0.750"
19mm
8AN - 1.32" 0.065" 0.095"
7/8" 0.875"
22.2mm
10AN - 1.51" 0.065" 0.095"
1.00" 1"
24.5mm
- - 1.76" 0.065" "0.095

MaxFlo Motorsport AN8 STAT-O-SEAL 3/4" / 19.05MM ID

✔ 100% satisfaction guarantee

✔ Motorsport Tested

€1,11 EUR
/
Tax included

Fast shipping and 2 year warranty

Maxflo Motorsport Warehouse

Available for pickup

Usually ready in 24 hours

MaxFlo Motorsport AN8 STAT-O-SEAL 3/4" / 19.05MM ID
MXFW2251
100 in stock
€1,11 EUR /each
Total:
MaxFlo Motorsport AN8 STAT-O-SEAL 3/4" / 19.05MM ID

Available for pickup

Usually ready in 24 hours

Maxflo Motorsport Warehouse

Available for pickup

Usually ready in 24 hours

Old Grange av
Monasterevin
Kildare
W34 W302
Ireland

Recently viewed

You may also like